Randolph County · AL

Metal roof installers in Graham, AL.

Compare free metal roof installers quotes in Graham. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Brick suburban American home with a gray asphalt shingle roof and landscaped front yard
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

Metal roof installers in Graham

What to know about metal roof installers in Graham.

Metal roofs are less forgiving than shingles: seams, flashing and fastening details decide how long they last. Choose an installer who can show finished metal jobs and who uses the manufacturer’s installation instructions.

For Randolph County, NOAA lists 1 hail report (largest 0.88 in), 23 damaging-wind reports (up to 59 mph) and 1 tornado report from January 2024 to June 2026. These count reports, not damaged roofs.

County
Randolph County
Hail reports (county)
1
Damaging wind reports
23
Before you hire

Questions to ask about metal roof installers.

  • Can I see metal roofs you installed in this area?
  • Do you fabricate trim on site or order it?
  • Are you certified by the panel manufacturer?
  • Who pays if a seam or fastener fails?
Local storm news

Recent storm reports near Graham.

Tornado26 mi N of Graham

EF0 tornado 3 mi WNW of Cold Water

The National Weather Service in Birmingham surveyed damage in northern Cleburne County and confirmed an EF-0 tornado with winds up to 80 mph. The tornado began in a heavily forested area between County Road (CR) 549 and CR 205, where...

Tornado9 mi N of Graham

EF0 tornado 3 mi NE of Union Hill

The tornado first touched down in a field just south of Cleburne|County Road (CR) 67 about 0.3 miles east of CR 49. The tornado|proceeded to destroy a half of an old barn, lofting and tossing|debris both upstream and downstream, as well...

Wind12 mi SW of Graham

43 mph estimated gust 1 mi S of Rice Mill

There were 10 to 12 campers damaged at Pineywoods Campground as strong wind over Lake Wedowee moved onshore.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Graham

Costs

Metal roof installers costs in Graham.

JobTypical US range
Metal roof (panels)$15,000 – $35,000
Standing seam metal roof$20,000 – $45,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

Metal roof installers in Graham, answered.

How do I find a good metal roof installer?

Ask for local references, photos of completed metal jobs, proof of insurance and the panel manufacturer’s certification if they have one.

Can any roofer install metal?

Not equally well. Metal needs different tools and flashing details; experience with metal specifically is important.

Do I need a permit for metal roof installers in Graham?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Randolph County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes