Alameda County · CA

Metal roof installers in Livermore, CA.

Compare free metal roof installers quotes in Livermore. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Two-story American home with a shingle roof, dormers and a covered front porch
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

Metal roof installers in Livermore

What to know about metal roof installers in Livermore.

Metal roofs are less forgiving than shingles: seams, flashing and fastening details decide how long they last. Choose an installer who can show finished metal jobs and who uses the manufacturer’s installation instructions.

For Alameda County, NOAA lists 1 hail report (largest 0.25 in), 1 damaging-wind report (up to 51 mph) and 0 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.

Population
84,867
County
Alameda County
Hail reports (county)
1
Damaging wind reports
1
Before you hire

Questions to ask about metal roof installers.

  • Can I see metal roofs you installed in this area?
  • Do you fabricate trim on site or order it?
  • Are you certified by the panel manufacturer?
  • Who pays if a seam or fastener fails?
Local storm news

Recent storm reports near Livermore.

Wind33 mi SW of Livermore

58 mph measured gust 2 mi SW of Permanente

The PG&E station on Monte Bello Road West reported a gust of 67 mph.

Wind34 mi SW of Livermore

65 mph measured gust 2 mi SW of Los Altos Hills

The PG&E station on Black Mountain reported a gust of 75 mph.

Wind34 mi W of Livermore

63 mph measured gust near (Sfo)Sfo Intl Arpt

San Francisco International Airport reported a peak wind gust of 73 mph at 2:56 AM. Wind gusts above 58 mph were noted between 2:40 and 2:59 AM.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Livermore

Costs

Metal roof installers costs in Livermore.

JobTypical US range
Metal roof (panels)$15,000 – $35,000
Standing seam metal roof$20,000 – $45,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

Metal roof installers in Livermore, answered.

How do I find a good metal roof installer?

Ask for local references, photos of completed metal jobs, proof of insurance and the panel manufacturer’s certification if they have one.

Can any roofer install metal?

Not equally well. Metal needs different tools and flashing details; experience with metal specifically is important.

Do I need a permit for metal roof installers in Livermore?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Alameda County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes