Toole County · MT

Metal roof installers in Sunburst, MT.

Compare free metal roof installers quotes in Sunburst. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Red colonial-style American house with a shake roof and two brick chimneys
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

Metal roof installers in Sunburst

What to know about metal roof installers in Sunburst.

Metal roofs are less forgiving than shingles: seams, flashing and fastening details decide how long they last. Choose an installer who can show finished metal jobs and who uses the manufacturer’s installation instructions.

For Toole County, NOAA lists 1 hail report (largest 1 in), 7 damaging-wind reports (up to 54 mph) and 0 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.

Population
352
County
Toole County
Hail reports (county)
1
Damaging wind reports
7
Before you hire

Questions to ask about metal roof installers.

  • Can I see metal roofs you installed in this area?
  • Do you fabricate trim on site or order it?
  • Are you certified by the panel manufacturer?
  • Who pays if a seam or fastener fails?
Local storm news

Recent storm reports near Sunburst.

Hail3 mi N of Sunburst

1-inch hail reported 3 mi N of Sunburst Arpt

One inch hail reported from mPING.

Wind29 mi E of Sunburst

63 mph measured gust 8 mi S of Whitlash

Mesonet station GW3546 WHITLASH SEVEN SOUTH measured a 72 mph wind gust. More exact timing estimated based on radar.

Wind34 mi E of Sunburst

71 mph measured gust 12 mi SSE of Whitlash

Mesonet station GW2412 Hill 2sw measured an 82 mph wind gust.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Sunburst

Costs

Metal roof installers costs in Sunburst.

JobTypical US range
Metal roof (panels)$15,000 – $35,000
Standing seam metal roof$20,000 – $45,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

Metal roof installers in Sunburst, answered.

How do I find a good metal roof installer?

Ask for local references, photos of completed metal jobs, proof of insurance and the panel manufacturer’s certification if they have one.

Can any roofer install metal?

Not equally well. Metal needs different tools and flashing details; experience with metal specifically is important.

Do I need a permit for metal roof installers in Sunburst?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Toole County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

More in Sunburst

Other roofing services in Sunburst.

Metal roof installers in nearby cities

Metal roof installers across Montana →

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes