Harris County · TX

Metal roof installers in Cloverleaf, TX.

Compare free metal roof installers quotes in Cloverleaf. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Two-story American home with a shingle roof, dormers and a covered front porch
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

Metal roof installers in Cloverleaf

What to know about metal roof installers in Cloverleaf.

Metal roofs are less forgiving than shingles: seams, flashing and fastening details decide how long they last. Choose an installer who can show finished metal jobs and who uses the manufacturer’s installation instructions.

For Harris County, NOAA lists 43 hail reports (largest 1.75 in), 57 damaging-wind reports (up to 90 mph) and 7 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.

County
Harris County
Hail reports (county)
43
Damaging wind reports
57
Before you hire

Questions to ask about metal roof installers.

  • Can I see metal roofs you installed in this area?
  • Do you fabricate trim on site or order it?
  • Are you certified by the panel manufacturer?
  • Who pays if a seam or fastener fails?
Local storm news

Recent storm reports near Cloverleaf.

Hail30 mi W of Cloverleaf

1-inch hail reported 3 mi SW of Satsuma

A member of the public submitted an mPING report, indicating quarter inch hail.

Hail30 mi W of Cloverleaf

1-inch hail reported 2 mi SW of Houston Weiser Arpt

A member of the public submitted an mPING report, indicating quarter inch hail.

Hail29 mi W of Cloverleaf

1-inch hail reported 2 mi SSW of Satsuma

A member of the public submitted an mPING report, indicating quarter inch hail.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Cloverleaf

Costs

Metal roof installers costs in Cloverleaf.

JobTypical US range
Metal roof (panels)$15,000 – $35,000
Standing seam metal roof$20,000 – $45,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

Metal roof installers in Cloverleaf, answered.

How do I find a good metal roof installer?

Ask for local references, photos of completed metal jobs, proof of insurance and the panel manufacturer’s certification if they have one.

Can any roofer install metal?

Not equally well. Metal needs different tools and flashing details; experience with metal specifically is important.

Do I need a permit for metal roof installers in Cloverleaf?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Harris County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes