Wind14 mi NW of Dickens
61 mph measured gust 3 mi NNW of Mc Adoo
A Texas Tech University West Texas mesonet site near McAdoo measured severe wind gusts from 1916 CST through 1917 CST with a peak wind gust of 70 mph.
Dickens County · TX
Metal roof installers in Dickens, TX.
Compare free metal roof installers quotes in Dickens. Tell us about your roof and up to three local roofing companies will contact you.
- Free for homeowners
- Up to 3 local companies
- No obligation
Get your free roofing quotes
Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.
Metal roof installers in Dickens
What to know about metal roof installers in Dickens.
Metal roofs are less forgiving than shingles: seams, flashing and fastening details decide how long they last. Choose an installer who can show finished metal jobs and who uses the manufacturer’s installation instructions.
For Dickens County, NOAA lists 7 hail reports (largest 6 in), 9 damaging-wind reports (up to 62 mph) and 1 tornado report from January 2024 to June 2026. These count reports, not damaged roofs.
- Population
- 209
- County
- Dickens County
- Hail reports (county)
- 7
- Damaging wind reports
- 9
Before you hire
Questions to ask about metal roof installers.
- Can I see metal roofs you installed in this area?
- Do you fabricate trim on site or order it?
- Are you certified by the panel manufacturer?
- Who pays if a seam or fastener fails?
Local storm news
Recent storm reports near Dickens.
Wind14 mi NW of Dickens
59 mph measured gust 3 mi NNW of Mc Adoo
A Texas Tech University West Texas mesonet site near McAdoo measured a severe wind gust of 68 mph.
Hailin the city
1.75-inch hail reported 1 mi SW of Dickens
Several storm chasers observed severe hail in and around Dickens ranging in size from half dollars to golf balls.
Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Dickens
Costs
Metal roof installers costs in Dickens.
| Job | Typical US range |
|---|---|
| Metal roof (panels) | $15,000 – $35,000 |
| Standing seam metal roof | $20,000 – $45,000 |
National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.
How it works
From quote to finished roof.
- Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
- We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
- Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.
FAQ
Metal roof installers in Dickens, answered.
How do I find a good metal roof installer?
Ask for local references, photos of completed metal jobs, proof of insurance and the panel manufacturer’s certification if they have one.
Can any roofer install metal?
Not equally well. Metal needs different tools and flashing details; experience with metal specifically is important.
Do I need a permit for metal roof installers in Dickens?
Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Dickens County building department for local rules.
Is this service free?
Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.
More in Dickens
Other roofing services in Dickens.
- Shingle roof replacement
- Tile roof repair
- Roof restoration
- Best roofers
- Affordable roofers
- Roofing insurance claim
- Standing seam metal roof
- TPO roofing
- Roof installation
- Roof repair
- All roofing in Dickens
Metal roof installers in nearby cities
