Bayfield County · WI

Metal roof installers in Port Wing, WI.

Compare free metal roof installers quotes in Port Wing. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Two-story American home with a shingle roof, dormers and a covered front porch
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

Metal roof installers in Port Wing

What to know about metal roof installers in Port Wing.

Metal roofs are less forgiving than shingles: seams, flashing and fastening details decide how long they last. Choose an installer who can show finished metal jobs and who uses the manufacturer’s installation instructions.

For Bayfield County, NOAA lists 13 hail reports (largest 1.5 in), 27 damaging-wind reports (up to 68 mph) and 0 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.

County
Bayfield County
Hail reports (county)
13
Damaging wind reports
27
Before you hire

Questions to ask about metal roof installers.

  • Can I see metal roofs you installed in this area?
  • Do you fabricate trim on site or order it?
  • Are you certified by the panel manufacturer?
  • Who pays if a seam or fastener fails?
Local storm news

Recent storm reports near Port Wing.

Hail24 mi SE of Port Wing

1.5-inch hail reported 2 mi ENE of Benoit

Wind23 mi E of Port Wing

60 mph estimated gust 2 mi SW of Washburn

Nevers Road reported impassable with photos of trees completely blocking the road. Several trees were also damaged at corner of Nevers Road and Highway 13.

Wind22 mi SE of Port Wing

60 mph estimated gust 2 mi SSE of Moquah

Numerous trees were down in the vicinity of Fish Creek Hill on Old US 2. Some of the trees were tall pine trees.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Port Wing

Costs

Metal roof installers costs in Port Wing.

JobTypical US range
Metal roof (panels)$15,000 – $35,000
Standing seam metal roof$20,000 – $45,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

Metal roof installers in Port Wing, answered.

How do I find a good metal roof installer?

Ask for local references, photos of completed metal jobs, proof of insurance and the panel manufacturer’s certification if they have one.

Can any roofer install metal?

Not equally well. Metal needs different tools and flashing details; experience with metal specifically is important.

Do I need a permit for metal roof installers in Port Wing?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Bayfield County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes