Brown County · NE

Standing seam metal roof in Long Pine, NE.

Compare free standing seam metal roof quotes in Long Pine. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Two-story American home with a shingle roof, dormers and a covered front porch
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

Standing seam metal roof in Long Pine

What to know about standing seam metal roof in Long Pine.

Standing seam panels have raised seams and concealed fasteners, which reduces leak points compared with exposed-fastener metal. They cost more and need installers who can do precise seaming and trim work.

For Brown County, NOAA lists 14 hail reports (largest 2 in), 7 damaging-wind reports (up to 91 mph) and 6 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.

Population
300
County
Brown County
Hail reports (county)
14
Damaging wind reports
7
Before you hire

Questions to ask about standing seam metal roof.

  • Is the quote for concealed-fastener panels and which panel profile?
  • What gauge and finish warranty is included?
  • How are penetrations and valleys detailed?
  • Can I see a standing seam roof you installed?
Local storm news

Recent storm reports near Long Pine.

Hail8 mi W of Long Pine

1.75-inch hail reported 1 mi W of Ainsworth

Golf ball sized hail reported in Ainsworth.

Wind8 mi W of Long Pine

91 mph estimated gust near Ainsworth

Severe thunderstorms producing several wet microbursts, led to violent winds in Ainsworth. Wind gusts, estimated at around 100 MPH, uprooted several mature trees in and around Ainsworth. Other mature trees were snapped above ground...

Wind14 mi W of Long Pine

70 mph estimated gust 1 mi E of (Anw)Ainsworth Muni

Thunderstorm wind gusts, estimated at 80 MPH sheared off multiple tree limbs up to 8 inches in diameter.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Long Pine

Costs

Standing seam metal roof costs in Long Pine.

JobTypical US range
Standing seam metal roof$20,000 – $45,000
Metal roof (panels)$15,000 – $35,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

Standing seam metal roof in Long Pine, answered.

What is a standing seam metal roof?

Metal panels that lock together with raised seams, hiding the fasteners and giving a clean look with fewer leak points.

How long does a standing seam roof last?

Often several decades, depending on metal, coating and installation. Check the warranty terms.

Do I need a permit for standing seam metal roof in Long Pine?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Brown County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes