Compare free standing seam metal roof quotes in Jacksonville. Tell us about your roof and up to three local roofing companies will contact you.
Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.
Standing seam panels have raised seams and concealed fasteners, which reduces leak points compared with exposed-fastener metal. They cost more and need installers who can do precise seaming and trim work.
For Onslow County, NOAA lists 9 hail reports (largest 1.75 in), 25 damaging-wind reports (up to 68 mph) and 3 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.
A tornado touched down near a farm on White Oak River Road in Maysville. The tornado damaged a farm building, causing significant roof damage, the collapse and removal of barn doors, and peeling off siding. Debris was blown downstream...
A brief tornado occurred in Jacksonville, NC, that caused a critical failure of the roof and|door structure of a large metal building used by the American Legion. The tornado was brief with a length of 0.15 miles and a width of 20...
KNCA ASOS measured a wind gust of 68 mph as the severe thunderstorms were moving through the area.
Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Jacksonville
| Job | Typical US range |
|---|---|
| Standing seam metal roof | $20,000 – $45,000 |
| Metal roof (panels) | $15,000 – $35,000 |
National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.
Metal panels that lock together with raised seams, hiding the fasteners and giving a clean look with fewer leak points.
Often several decades, depending on metal, coating and installation. Check the warranty terms.
Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Onslow County building department for local rules.
Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.
