Hail19 mi S of Pendleton
1.5-inch hail reported 1 mi ENE of Rogers
A social media post reported ping pong sized hail at the FM 2184 and HWY 190 bridge in Rogers.
Bell County · TX
Standing seam metal roof in Pendleton, TX.
Compare free standing seam metal roof quotes in Pendleton. Tell us about your roof and up to three local roofing companies will contact you.
- Free for homeowners
- Up to 3 local companies
- No obligation
Get your free roofing quotes
Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.
Standing seam metal roof in Pendleton
What to know about standing seam metal roof in Pendleton.
Standing seam panels have raised seams and concealed fasteners, which reduces leak points compared with exposed-fastener metal. They cost more and need installers who can do precise seaming and trim work.
For Bell County, NOAA lists 27 hail reports (largest 2.75 in), 21 damaging-wind reports (up to 87 mph) and 3 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.
- County
- Bell County
- Hail reports (county)
- 27
- Damaging wind reports
- 21
Before you hire
Questions to ask about standing seam metal roof.
- Is the quote for concealed-fastener panels and which panel profile?
- What gauge and finish warranty is included?
- How are penetrations and valleys detailed?
- Can I see a standing seam roof you installed?
Local storm news
Recent storm reports near Pendleton.
Wind23 mi W of Pendleton
58 mph measured gust 1 mi ENE of Hood Afb
KHLR recorded a southeasterly 58 knot (67 mph) wind gust.
Wind24 mi W of Pendleton
55 mph estimated gust near Hood Afb
A broadcast media report indicated that part of the roof was blown off of an apartment building on North 2nd Street in Killeen.
Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Pendleton
Costs
Standing seam metal roof costs in Pendleton.
| Job | Typical US range |
|---|---|
| Standing seam metal roof | $20,000 – $45,000 |
| Metal roof (panels) | $15,000 – $35,000 |
National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.
How it works
From quote to finished roof.
- Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
- We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
- Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.
FAQ
Standing seam metal roof in Pendleton, answered.
What is a standing seam metal roof?
Metal panels that lock together with raised seams, hiding the fasteners and giving a clean look with fewer leak points.
How long does a standing seam roof last?
Often several decades, depending on metal, coating and installation. Check the warranty terms.
Do I need a permit for standing seam metal roof in Pendleton?
Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Bell County building department for local rules.
Is this service free?
Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.
More in Pendleton
Other roofing services in Pendleton.
- Tile roof repair
- Roof restoration
- Best roofers
- Affordable roofers
- Roofing insurance claim
- TPO roofing
- Roof installation
- Roof repair
- Roof replacement
- Roofing contractors
- All roofing in Pendleton
Standing seam metal roof in nearby cities
