Natrona County · WY

Standing seam metal roof in Evansville, WY.

Compare free standing seam metal roof quotes in Evansville. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Two-story American home with a shingle roof, dormers and a covered front porch
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

Standing seam metal roof in Evansville

What to know about standing seam metal roof in Evansville.

Standing seam panels have raised seams and concealed fasteners, which reduces leak points compared with exposed-fastener metal. They cost more and need installers who can do precise seaming and trim work.

For Natrona County, NOAA lists 6 hail reports (largest 2.25 in), 32 damaging-wind reports (up to 75 mph) and 0 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.

Population
2,837
County
Natrona County
Hail reports (county)
6
Damaging wind reports
32
Before you hire

Questions to ask about standing seam metal roof.

  • Is the quote for concealed-fastener panels and which panel profile?
  • What gauge and finish warranty is included?
  • How are penetrations and valleys detailed?
  • Can I see a standing seam roof you installed?
Local storm news

Recent storm reports near Evansville.

Wind10 mi W of Evansville

67 mph measured gust near (Cpr)Natrona Co Arpt

There were several reports of strong thunderstorm wind around Casper. The strongest gust was 67 mph at Scenic Drive on the south side of Casper.

Wind16 mi N of Evansville

69 mph measured gust 14 mi N of Bar Nunn

Wind gusts as high as 79 mph occurred at 20 Mile Hill along Interstate 25.

Wind30 mi W of Evansville

70 mph measured gust near Natrona

Wind gusts over 58 mph occurred along Us 20 26 from Natrona to Evansville. The strongest wind gust recorded was 81 mph at the Natrona County airport to the west of Casper.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Evansville

Costs

Standing seam metal roof costs in Evansville.

JobTypical US range
Standing seam metal roof$20,000 – $45,000
Metal roof (panels)$15,000 – $35,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

Standing seam metal roof in Evansville, answered.

What is a standing seam metal roof?

Metal panels that lock together with raised seams, hiding the fasteners and giving a clean look with fewer leak points.

How long does a standing seam roof last?

Often several decades, depending on metal, coating and installation. Check the warranty terms.

Do I need a permit for standing seam metal roof in Evansville?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Natrona County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes