Wind19 mi SW of Phillipsville
61 mph estimated gust near Shelter Cove
Three trees down on Hillside Drive in Shelter Cove. Winds were estimated at between 60 and 70 mph.
Humboldt County · CA
TPO roofing in Phillipsville, CA.
Compare free tPO roofing quotes in Phillipsville. Tell us about your roof and up to three local roofing companies will contact you.
- Free for homeowners
- Up to 3 local companies
- No obligation
Get your free roofing quotes
Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.
TPO roofing in Phillipsville
What to know about tPO roofing in Phillipsville.
TPO is a heat-welded single-ply membrane common on commercial and low-slope roofs. It is white and reflective, and seam quality is what mostly decides its lifespan.
For Humboldt County, NOAA lists 1 hail report (largest 1 in), 10 damaging-wind reports (up to 61 mph) and 0 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.
- County
- Humboldt County
- Hail reports (county)
- 1
- Damaging wind reports
- 10
Before you hire
Questions to ask about tPO roofing.
- Who welds the seams and how are they tested?
- What membrane thickness and manufacturer warranty are quoted?
- How are drains, flashing and penetrations detailed?
- Is tear-off or recover being proposed and why?
Local storm news
Recent storm reports near Phillipsville.
Hail73 mi NE of Phillipsville
1-inch hail reported 9 mi S of Trinity Center
Report of half-inch to one-inch sized hail near Trinity Lake.
Hail76 mi N of Phillipsville
1-inch hail reported 1 mi W of Orleans
A severe thunderstorm developed over the Trinity Alps Wilderness and moved north over Orleans. Numerous reports of hail were received with pea to nickel sized hail generally reported. One report was received of 1 inch hail stones near...
Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Phillipsville
Costs
TPO roofing costs in Phillipsville.
| Job | Typical US range |
|---|---|
| Flat roof (TPO / EPDM), average home | $5,000 – $12,000 |
National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.
How it works
From quote to finished roof.
- Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
- We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
- Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.
FAQ
TPO roofing in Phillipsville, answered.
What is TPO roofing?
A thermoplastic polyolefin single-ply membrane whose seams are heat-welded; common on flat commercial roofs.
TPO or EPDM, which is better?
Both work. TPO is heat-welded and reflective; EPDM is a rubber membrane with glued or taped seams. Installer experience matters more than the name.
Do I need a permit for tPO roofing in Phillipsville?
Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Humboldt County building department for local rules.
Is this service free?
Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.
More in Phillipsville
Other roofing services in Phillipsville.
- Roofers near me
- Roofing companies
- Roof leak repair
- Roof inspection
- Roof replacement cost
- New roof cost
- Metal roofing
- Metal roof installers
- Flat roof repair
- Roof estimate
- All roofing in Phillipsville
TPO roofing in nearby cities
