Taylor County · GA

TPO roofing in Howard, GA.

Compare free tPO roofing quotes in Howard. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Aerial view of a home with a dark standing seam metal roof
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

TPO roofing in Howard

What to know about tPO roofing in Howard.

TPO is a heat-welded single-ply membrane common on commercial and low-slope roofs. It is white and reflective, and seam quality is what mostly decides its lifespan.

For Taylor County, NOAA lists 4 hail reports (largest 2 in), 3 damaging-wind reports (up to 51 mph) and 0 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.

County
Taylor County
Hail reports (county)
4
Damaging wind reports
3
Before you hire

Questions to ask about tPO roofing.

  • Who welds the seams and how are they tested?
  • What membrane thickness and manufacturer warranty are quoted?
  • How are drains, flashing and penetrations detailed?
  • Is tear-off or recover being proposed and why?
Local storm news

Recent storm reports near Howard.

Tornado23 mi NE of Howard

EF0 tornado 1 mi WSW of Salem

A weak velocity couplet was detected on radar northwest of the intersection of Grays Chapel Rd and Grady Pennyman Rd at 7:20 AM. The storm tracked to the east, with a tornado debris signature (TDS) appearing at 7:24 AM over Grays Chapel...

Wind23 mi N of Howard

61 mph estimated gust 1 mi E of Crest

The emergency manager relayed a report of multiple trees down along pickard road between firetower road and burkett road.

Tornado23 mi N of Howard

EF0 tornado 1 mi SW of Crest

Tornado damage was first observed on Hendricks Church Road where a few small pine trees were snapped. Damage continued across Hurricane Creek where approximately 20-30 trees were knocked down or uprooted in private farmland. The path...

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Howard

Costs

TPO roofing costs in Howard.

JobTypical US range
Flat roof (TPO / EPDM), average home$5,000 – $12,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

TPO roofing in Howard, answered.

What is TPO roofing?

A thermoplastic polyolefin single-ply membrane whose seams are heat-welded; common on flat commercial roofs.

TPO or EPDM, which is better?

Both work. TPO is heat-welded and reflective; EPDM is a rubber membrane with glued or taped seams. Installer experience matters more than the name.

Do I need a permit for tPO roofing in Howard?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Taylor County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes