Lake of the Woods County · MN

TPO roofing in Angle Inlet, MN.

Compare free tPO roofing quotes in Angle Inlet. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Brick suburban American home with a gray asphalt shingle roof and landscaped front yard
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

TPO roofing in Angle Inlet

What to know about tPO roofing in Angle Inlet.

TPO is a heat-welded single-ply membrane common on commercial and low-slope roofs. It is white and reflective, and seam quality is what mostly decides its lifespan.

For Lake of the Woods County, NOAA lists 1 hail report (largest 2.75 in), 3 damaging-wind reports (up to 61 mph) and 1 tornado report from January 2024 to June 2026. These count reports, not damaged roofs.

County
Lake of the Woods County
Hail reports (county)
1
Damaging wind reports
3
Before you hire

Questions to ask about tPO roofing.

  • Who welds the seams and how are they tested?
  • What membrane thickness and manufacturer warranty are quoted?
  • How are drains, flashing and penetrations detailed?
  • Is tear-off or recover being proposed and why?
Local storm news

Recent storm reports near Angle Inlet.

Hail32 mi SW of Angle Inlet

1-inch hail reported near (D45)Carlson Fld War

Public reports quarter sized hail 3 NW of Warroad, MN.

Hail32 mi S of Angle Inlet

1.25-inch hail reported 1 mi N of Warroad

Public reports half-dollar sized hail in Warroad, MN.

Hail32 mi S of Angle Inlet

1-inch hail reported 6 mi N of Roosevelt

Public reports hail that was quarter sized or slightly larger in Roosevelt, MN.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Angle Inlet

Costs

TPO roofing costs in Angle Inlet.

JobTypical US range
Flat roof (TPO / EPDM), average home$5,000 – $12,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

TPO roofing in Angle Inlet, answered.

What is TPO roofing?

A thermoplastic polyolefin single-ply membrane whose seams are heat-welded; common on flat commercial roofs.

TPO or EPDM, which is better?

Both work. TPO is heat-welded and reflective; EPDM is a rubber membrane with glued or taped seams. Installer experience matters more than the name.

Do I need a permit for tPO roofing in Angle Inlet?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Lake of the Woods County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes