Fort Bend County · TX

TPO roofing in Kendleton, TX.

Compare free tPO roofing quotes in Kendleton. Tell us about your roof and up to three local roofing companies will contact you.

  • Free for homeowners
  • Up to 3 local companies
  • No obligation
Red colonial-style American house with a shake roof and two brick chimneys
Get your free roofing quotes

Free, no obligation. Takes about 60 seconds. Your request goes to up to 3 local roofing companies.

TPO roofing in Kendleton

What to know about tPO roofing in Kendleton.

TPO is a heat-welded single-ply membrane common on commercial and low-slope roofs. It is white and reflective, and seam quality is what mostly decides its lifespan.

For Fort Bend County, NOAA lists 15 hail reports (largest 2.75 in), 9 damaging-wind reports (up to 67 mph) and 0 tornado reports from January 2024 to June 2026. These count reports, not damaged roofs.

Population
407
County
Fort Bend County
Hail reports (county)
15
Damaging wind reports
9
Before you hire

Questions to ask about tPO roofing.

  • Who welds the seams and how are they tested?
  • What membrane thickness and manufacturer warranty are quoted?
  • How are drains, flashing and penetrations detailed?
  • Is tear-off or recover being proposed and why?
Local storm news

Recent storm reports near Kendleton.

Lightning26 mi NE of Kendleton

Lightning reported 2 mi WSW of Katy

A news broadcast reported a house fire in the Katy area caused by a lightening strike.

Hail21 mi NE of Kendleton

1-inch hail reported 7 mi W of Clodine

Multiple rounds of hail were reported near Cinco Ranch, ranging from quarter size to penny and nickel size.

Hail30 mi E of Kendleton

1.25-inch hail reported 3 mi NE of Dewalt

Broadcast media reported hail near the intersection of Turtle Creek Dr and Point Clear Dr. A large volume of the hail was nickel sized. The largest stones were over 1 inch but less than 1.5 inches.

Source: NOAA NCEI Storm Events Database, data through Jun 30, 2026. All storm reports for Kendleton

Costs

TPO roofing costs in Kendleton.

JobTypical US range
Flat roof (TPO / EPDM), average home$5,000 – $12,000

National planning ranges for an average ~2,000 sq ft home, not quotes. Local labor, roof pitch, layers to remove, materials and permits change the price.

How it works

From quote to finished roof.

  1. Tell us about your roofFive quick questions about the job, roof type and timing. No account needed.
  2. We match local companiesYour request goes to up to three roofing companies that serve your ZIP code.
  3. Compare written quotesThey contact you to schedule an inspection. Compare price, scope and warranty, then choose or walk away.

Get my free quotes

FAQ

TPO roofing in Kendleton, answered.

What is TPO roofing?

A thermoplastic polyolefin single-ply membrane whose seams are heat-welded; common on flat commercial roofs.

TPO or EPDM, which is better?

Both work. TPO is heat-welded and reflective; EPDM is a rubber membrane with glued or taped seams. Installer experience matters more than the name.

Do I need a permit for tPO roofing in Kendleton?

Many cities and counties require a building permit for roof work; the roofing company normally pulls it. Ask who is responsible and request a copy. Check with the Fort Bend County building department for local rules.

Is this service free?

Yes. RoofersNearMeHub is free for homeowners. Roofing companies that receive your request may pay us for the introduction; you are never obliged to hire anyone.

Modern roofline against a clear blue sky

Ready for real quotes?

Two minutes, no obligation, no cost.

Get my free quotes